Tension Measurement, inc. Tension Sensor Drawings And Specifications
CFR Style Mounting Flange |
CFM Style Mounting Flange |
CFF Style Mounting Flange |
 |
 |
Specifications:
| Sensor Ranges: From 3
grams to 5000 grams Operating Temperature: 70º F ± 25° F Excitation Voltage Recommended: Regulated 5-10 vDC Bridge Resistance: 350 Ohm Nominal Output Signal: 1-2 mV/V full scale nominal Resistance to Ground: Exceeding 500 megohms Zero Balance: Less than 1.5% full scale Drift at midpoint: 0.2% Noise Level: Less than 0.2% Linearity: 0.5% |
Combined Linearity &
Hysteresis: ±0.75% Full Scale Accuracy (Total Error): 1% FS Repeatability: .25% - .5% Rollers: Four standard roller types offered, custom options available. Shielded Cable: PTFE insulated, with braided shield. 10 ft. standard. Transducer Material: Typically Aluminum and/or Stainless Overload Protection: 100% Minimum. Sensor housing provides physical overload stops for additional overload protection. |
|
|
| MPHB-Series, Base Mount, Three Roller Tension Sensors |
|
|
 |
Specifications:
| Sensor Ranges: From 3
grams to 5000 grams Operating Temperature: 70º F ± 25° F Excitation Voltage Recommended: Regulated 5-10 vDC Bridge Resistance: 350 Ohm Nominal Output Signal: 1-2 mV/V full scale nominal Resistance to Ground: Exceeding 500 megohms Zero Balance: Less than 1.5% full scale Drift at midpoint: 0.2% Noise Level: Less than 0.2% Linearity: 0.5% |
Combined Linearity &
Hysteresis: ±0.75% Full Scale Accuracy (Total Error): 1% FS Repeatability: .25% - .5% Rollers: Five standard hard anodized aluminum rollers with lengths from 2" - 6". Roller diameters are 1.5". Custom roller options also offered. Shielded Cable: PTFE insulated, with braided shield. 10 ft. standard. Transducer Material: Typically Aluminum and/or Stainless Overload Protection: 100% Minimum. Sensor housing provides physical overload stops for additional overload protection. |
 |
Specifications:
| Sensor Ranges: From 3
grams to 5000 grams Operating Temperature: 70º F ± 25° F Excitation Voltage Recommended: Regulated 5-10 vDC Bridge Resistance: 350 Ohm Nominal Output Signal: 1-2 mV/V full scale nominal Resistance to Ground: Exceeding 500 megohms Zero Balance: Less than 1.5% full scale Drift at midpoint: 0.2% Noise Level: Less than 0.2% Linearity: 0.5% |
Combined Linearity &
Hysteresis: ±0.75% Full Scale Accuracy (Total Error): 1% FS Repeatability: .25% - .5% Rollers: Five standard hard anodized aluminum rollers with lengths from 2" - 6". Roller diameters are 1.5". Custom roller options also offered. Shielded Cable: PTFE insulated, with braided shield. 10 ft. standard. Transducer Material: Typically Aluminum and/or Stainless Overload Protection: 100% Minimum. Sensor housing provides physical overload stops for additional overload protection. |
| MP-C-Series, Cantilever
Mount, Single Roller Tension Sensors
Dimensions Shown For Model Ranges to 5000 Grams (11 lbs) |
Call For Detailed Drawings of Higher Capacity Sensor Models |
 |
Specifications:
Operating Temperature: 70º F ± 25° F Excitation Voltage Recommended: Regulated 5-10 vDC Sensor Ranges: From 3 grams to 2000 grams Bridge Resistance: 350 Ohm Nominal Output Signal: 1-2 mV/V full scale nominal Resistance to Ground: Exceeding 500 megohms Zero Balance: Less than 1.5% full scale Drift at midpoint: 0.2% Noise Level: Less than 0.2% Linearity: 0.5% |
Combined Linearity &
Hysteresis: ±0.75% Full Scale Accuracy (Total Error): 1% FS Repeatability: .25% - .5% Rollers: Five standard hard anodized aluminum rollers with lengths from 2" - 6". Roller diameters are 1.5". Custom roller options also offered. Shielded Cable: PTFE insulated, with braided shield. 10 ft. standard. Transducer Material: Typically Aluminum and/or Stainless Rollers: Six standard hard anodized aluminum rollers with lengths from 2" to 8". Roller diameters are 1.25". Custom roller options also offered. Overload Protection: 200%-1000% (range dependant). Overload arm and endplate for added 360 degree overload protection. |
Call For Detailed Drawings of Higher Capacity Sensor Models
Other Models to 500 Lbs Available
 |
Specifications:
Operating Temperature: 70º F ± 25° F Excitation Voltage Recommended: Regulated 5-10 vDC Sensor Ranges: From 3 grams to 2000 grams Bridge Resistance: 350 Ohm Nominal Output Signal: 1-2 mV/V full scale nominal Resistance to Ground: Exceeding 500 megohms Zero Balance: Less than 1.5% full scale Drift at midpoint: 0.2% Noise Level: Less than 0.2% Linearity: 0.5% |
Combined Linearity &
Hysteresis: ±0.75% Full Scale Accuracy (Total Error): 1% FS Repeatability: .25% - .5% Rollers: Five standard hard anodized aluminum rollers with lengths from 2" - 6". Roller diameters are 1.5". Custom roller options also offered. Shielded Cable: 10 ft. standard with circular 5 pin connector. Transducer Material: Typically Aluminum and/or Stainless Overload Protection: 100% minimum. The sensor's housing also incorporates physical stops for overload protection. |
Manufactured in The USA
Return to Home Page |
© 1998 Tension Measurement, inc.
